Power supply, cables, data SIM
- Input voltage: 100 ~ 240 VAC
- Output voltage: 12 VDC
- Output current: 2A
- 12V lead acid battery charging
(current max. 0.5A) - Deep discharge battery protection
(disconnects battery under 10.5V) - Failure indications (LED and OUTPUTS, NC type)
- battery missing
- battery low (under 11.5V)
- AC power loss - Electrical protections:
- overvoltage
- overload
- short circuit
- battery reverse polarity - EMC compatible (EN55032, EN61000-4)
- Compliance with EN50131-6 standard
- Operating temperature: -30℃ / +70℃
- Dimensions (LxWxH): 82x60x33 mm
- Net weight: 150g
- Mounting: DIN rail or surface mountable
- Alarm system communicators
- Access control systems
- Electromagnetic locks
- Uninterruptible power supply
Universal uninterruptible power supply for 12V systems up to 30W power requirement.
The power supply compliance with EN50131-6 standard, it is protected against output short circuit and overload,
and has outputs for status monitoring of battery failure, disconnection, and AC failure.
Compact size and easy mounting on DIN-rail or flat surface.
- Simple and cheap connecting cable
- Provides full access to the remote alarm
- For all types of DSC alarm panel
Data transmission cable for remote programming of alarm systems or downloading the event lists. Using the remote serial connection function, any alarm panel can be programmed remotely, all you need is a laptop and an internet connection. This feature is supported by a large number of Securecom products, whether they are wired LAN, wireless WIFI or communicate via a mobile data network. The cable connects the serial port of the alarm panel to the serial output of the Securecom communicator. The RemoteSerial software running on the user's computer remotely connects to the alarm panel as if the alarm panel were physically connected to the COM port of the PC. All signals (all bits) coming from the alarm to the physical serial port of the communicator will appear on the virtual COM port of the Remote Serial program, and vice versa. This "tunnel connection" is established over the Internet and is provided by the PULOWARE IoT server.
- Simple and cheap connecting cable
- Provides full access to the remote alarm
- For all types of Paradox alarm panel
Data transmission cable for remote programming of alarm systems or downloading the event lists. Using the remote serial connection function, any alarm panel can be programmed remotely, all you need is a laptop and an internet connection. This feature is supported by a large number of Securecom products, whether they are wired LAN, wireless WIFI or communicate via a mobile data network. The cable connects the serial port of the alarm panel to the serial output of the Securecom communicator. The RemoteSerial software running on the user's computer remotely connects to the alarm panel as if the alarm panel were physically connected to the COM port of the PC. All signals (all bits) coming from the alarm to the physical serial port of the communicator will appear on the virtual COM port of the Remote Serial program, and vice versa. This "tunnel connection" is established over the Internet and is provided by the PULOWARE IoT server.
- 300 MB data, 2 years availability
- Easy top up
- No annual mandatory data reconciliation
- Network and country independent, without a price difference
- Applicable for Securecom remote monitoring and mobile app-based products
